Explosion Proof Portable Air Chiller
The EPF-AC-30 Class 1, Division 1 portable evaporative cooling system is rated for use in hazardous location work environments.
This explosion proof air chiller combines a non-sparking fan and dry mist technology to cool Class 1 Division 1 work areas that do not have access to traditional air conditioning. This portable cooling is equipped with a 34 gallon tank and 2 separate water filters to cool the work environment for up to 8 hours.
Larson Electronics’ evaporative cooling unit is rated Class 1, Division 1 & 2, Group D and Class 2, Divisions 1 & 2, Groups E, F & G explosion proof environments. Using dry mist technology, this air chiller ensures that your work environment stays dry while lowering the ambient temperature. At 36" wide by 39" deep by 66" tall, this evaporative cooling unit can reach an evaporation zone of 5’-10’. With a 30" inch fan and eight spray nozzles, this unit is applicable to work areas with smaller access ways. This portable cooling system will automatically shut off once the water reservoir is empty, so operators don’t need to worry about burning out the pumps.
With a fan unit running at 8723 RPM, this portable misting unit can chill down any industrial or commercial space in need of a cool down. Since one tank can easily last an entire work shift, there is no need for messy hose connections running throughout the work space. It is designed to be self-maintaining, therefore operators will not need to interrupt their work to replace pads or clean the nozzles.
Features
• Explosion proof
• Enclosed wires and motors
• 30" spark proof blade
• Application of dry mist technology
• Approved for Class I, Div. 1 & 2 and Class II, Div. 1 & 2 environments
• Drops temperatures 20-30° Fahrenheit
• Operates up to 8 hours on a single tank
• Automatic pump shutoff when tank nears empty.
• Weighs 175 lbs
• Reaches an area of 3,500 square feet
• Can be crane lifted
• 0.7 GPM at 60 PSI
• Eight individual spray nozzles strategically placed around the fan.
This unit comes with a 30" spark proof aluminum blade and enclosed wire and motors. The fan blades are spark resistant and the unit is easily transported to various job sites. This cooler is easily transfered with 6" pneumatic wheels and connects via a 20' cord terminating in an explosion proof plug. This unit operates on 120V or 220V AC and has an amp draw of 6.62A on a 120VAC system.
Larson Electronics’ hazardous location evaporative cooling unit is easy to move around with its quick connect crane pick-eye and its powder coated steel tubing frame ensures minimal rusting and longevity. Applications include Class 1 Division 2 areas, including oil rig floors, construction sites, and tank cleaning applications.
Contact Details and Archive...