Hamilton Litestat 1-10V Grid Module
Hamilton Litestat has added to its extensive GridIt wiring accessory range a 1-10v Grid Module for use with Analogue regulated Fluorescent ballasts. This manually operated high frequency ballast controller has been developed to offer specifiers enhanced versatility, as well as providing an effective and economical way to dim fluorescent lamps.
The Ballast Control module is ideal for commercial applications enabling contractors to build up the required plate configurations on site. Each unit is installed with a suitably rated 2 way grid switch in order to effectively switch and control up to a maximum of 20 amps.
A further addition to the Hamilton’s GridIt grid switch range is a 0 -10volt DC control for use with Hamilton’s Dimming System range. The control is used in conjunction with Hamilton’s analogue remote mounted dimmer packs, which offer an economic solution when having to dim higher loads up to 5000watts. The manual control can be mounted along side other switches etc within a grid assembly but a phase barrier will need to be fitted in the grid wall box to avoid any cross interference from the different voltages. To match the plate, colour coded mounting kits consisting of metal infill and control knob are also available and supplied separately
Designed for installation into folded 35mm metal wall boxes, these modules comply with the requirements of BS4662:2006.
Contact Details and Archive...
Related Articles...