Wago TOPJOB®S Terminal Blocks
Wago's TOPJOB®S range of compact-design terminal blocks now offers options of 2- and 4-conductor single level or 4- conductor double deck disconnect units.
The 2- and 4-conductor terminal blocks have a width of only 5.2mm making them ideal for both control and process measurement systems as well as transformer circuits. A key feature is the knife disconnect which clearly indicates the circuit state. It is not covered by wiring so is easily accessible. Dual jumper slots are in the same position as the rest of the TOPJOB®S terminal blocks.
The double deck disconnect terminal blocks offer two isolating terminals with different potentials in a 5.2mm wide housing, helping save space in the serial arrangement without loss of visualisation. Both knife disconnect blades are located between the conductors in the upper deck, providing good optical control.
TOPJOB®S terminal blocks allow a connection from 0.25 – 2.5mm² (up to 4mm² solid or stranded conductors) and are rated at 16A /400V. A solid, stranded and a ferruled conductor can be pushed directly into the wire entry hole. For fine stranded conductors a screwdriver is inserted into the aperture above the wire entry, opening the clamp. Once the wire is inserted, the screwdriver is removed and the connection is made. The conductor is released by inserting the screwdriver to open the clamp.
Contact Details and Archive...
Related Articles...